Porsche 911 (996) 1999-2005 Car Stereo Single or Double Din Fascia Panel Application & Amplified Active Speaker Interface Adaptor Fitting Kit
This fascia kit allows the installation of an aftermarket head unit into a non din sized aperture with a high quality finish designed to match the vehicle dashboard.
Head unit mounts directly into the fascia and there is no need for an additional fitting cage.
Relocation trim and pocket for the heater controls, some cars with original single din units have the heater controls located higher on the dashboard with the radio, this extra trim allows the heater controls to be relocated lower on the dashboard where the cd storage slots and pocket usually are. See 2nd picture
Wiring Interface Description
Converts the Porsche Wiring Harness to Speaker Level Inputs for connecting to a new car stereo with ISO Lead.
These adaptors convert the new head unit you are fitting to activate the speakers.
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and the other end into your new radio, without the need of tools or cutting of wires.
Please Note: Not compatible with fibre optic amplifiers
To activate rear speakers, the blue & White wire on the Red mini ISO plug also needs to be connected to the Blue wire coming off of the New Head Unit (marked Amp Remote)
Please Note:
Only fits the following vehicles listed below and with the relevant factory head unit if specified in the table (Please check before you buy). Manufacturer part numbers are used for reference only, parts supplied may be from different manufacturers.
| Manufacturer | Model | Note | Year From | Year To | Headunit | Connection |
| Porsche | 911 | (996) | 1999 | 2005 | | N//A |
| Porsche | Boxster | (986) | 1997 | 2004 | | N//A |
Installation tip:
- This panel is designed to fit 6"-7" double din units. Most Japanese brands such as Kenwood, Pioneer, JVC, Sony, Alpine and Clarion will suit this fascia.
- If you are fitting a non-branded unit from china with brands such as EONON and Xtron, there is a VERY high possibility YOU will have to modify this panel to suit the stereo and accommodate it in your dash.
- These panels are designed based on Japanese stereo's which are a uniformed standard size, stereos from china can be different sizes and we cannot guarantee the stereo will fit without modification.
Disclaimer:
- If unsure of the part that you require for your vehicle then please message us before you make your purchase as we cannot be responsible for returns and postage costs.
- The picture(s) in this listing are for illustration purposes only. The product design / style can vary due to alterations by suppliers during production.
- This product has been developed through carefully documented data and research from our suppliers. We cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.
About Us:
The Bass Junkies Car Audio team has been proudly serving car audio products since 1995. We are one of the biggest Internet resellers of brand named in car technology products to date. We have a large state of the art showroom based in the West Midlands and is the place to be for all your IN CAR gadgets.
