Autoleads PC4-28 - 2000 WATTS MONSTER OFC PURE COPPER CABLE KIT - 0 AWG Gauge Complete Car Amp Amplifier Power Wiring Kit - Will Power 2 High Current Amps
COMES WITH ANL FUSE HOLDER - 2 WAY DISTRIBUTION BLOCK - EARTH BLOCK - POSITIVE BATTERY CLAMP - 5 METRE 0 AWG COPPER CABLE - 2.5 METRE 4 AWG COPPER CABLE - 0 & 4 EARTH CABLE - ALL FUSES TERMINALS & FITTINGS
Autoleads largest 2000 Watts amp power cable kit is designed to power up to two high current amplifiers.
It has a large ANL fuse holder for the battery end, a second heavy duty 2 way fuse distribution holder to take two live lines through it, also comes with an earth wire distribution block and a positive battery clamp.
Cabling includes 5 metre of 0 AWG power cable & 1 metre of 0 AWG ground cable, 2.5 metres of 4 AWG is also included along with whole host of terminals and fittings
Labelled as 2000 watts, this monster kit is packaged in a very large blister, so heavy that it has to be held together with rivets at strategic points.
"They dont make kits like this anymore"
Includes:
- 5 metres one over gauge blue power cable with 1/0 gauge ring terminal
- 1 metre one over gauge silver ground cable with 1/0 gauge ring terminal
- 2.5 metres four gauge blue power cable
- 2 metres four gauge silver ground cable
- 5 metres 18 gauge remote turn on wire
- ANL Cylindrical fuse holder and 100 Ampere ANL fuse
- ANL Dual fuse holder power distribution block, 1/0 ga. Input and two 100 Ampere ANL fuses to two 4ga. Outputs
- Battery terminal clamp with knurled knob; 1x 1/0 ga, 1x 4ga, 2x 8ga outputs
- Non-fused power distribution block; 2x 1/0ga. in, 4x 4ga. Out
- 4 x 4 gauge ring terminals, two each black and red
- 4 x 4 gauge spade terminals, two each black and red
- 2 x butt connectors approx
- 10 x self tapping screws approx
- 10 x 15mm cable ties approx
- 4 x gauge grommet approx.
Please Note RCA if required would have to be ordered separately
