Connects2 Full Fitting Kit for Audi Q3 2011-2018. Installation for Audi Q3 vehicles. This kit is supplied with a single DIN fascia panel, steering wheel control interface, antenna adapter and universal patchlead. The interface that comes with this kit helps to retain factory features including your steering wheel controls whilst the fascia panel helps to re-create the OEM aesthetics of the vehicle. *Note - For non-navigation vehicles with either non-amplified, half amplified or BOSE amplified systems. Not compatible for models with a digital amplifier. New radio must have RCA audio out connections.
- Contains universal patchlead CTMULTILEAD.2
- This product has been developed through carefully documented data and research.
Fitting Kit Breakdown:
Fascia PanelAudi Single Din Fascia Plate (Black)This fascia kit allows the installation of an aftermarket head unit into a non din sized aperture
High quality finish designed to match the vehicle dashboard
Fascia kit supplied with brackets or cage if required (please see product image)
This product has been developed through carefully documented data and research. Connects2 Ltd. cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.
Steering Controls AdapterAudi CAN-Bus Steering Control Interface. Contains Both ISO & Quadlock Connection Leads with RCA Connections. For either non-amplified, half amplified or BOSE amplified systems. Not for models with a digital amplifier. *Note - New Radio Must Have RCA Audio Out Connectors. This product is supplied with two looms. Before installation, select the loom with the relevant connector type required for the vehicle (ISO or Quadlock) and discard the other loom.Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
Plug and play, no cutting of wires required
Maintains the original features of the vehicle such as date, time and temperature display
Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
For interfaces where phone buttons are supported, the following brands allow pick up/hang up in Bluetooth mode: Alpine, Clarion, Kenwood, Pioneer and Zenec. Please see icon list below to see if this interface supports phone buttons.
Please check the connections in the vehicle match the harness you are purchasing
This product has been developed through carefully documented data and research. Connects2 Ltd. cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.
Aerial AdapterFakra to DIN Antenna Adapter With Phantom Power SupplyConverts car specific antenna connector to a universal aftermarket connector
Steering Controls AdapterUniversal patch lead to connect an aftermarket stereo to a Connects2 interface. Supports most major head unit brands including Alpine, Clarion, JVC Kenwood, Panasonic, Pioneer, Sony and more.This head unit connection lead can be used with all of the Connects2 steering wheel control interface range
This kit is designed to fit the following vehicles:- Audi Q3 2011-2018 (8U. Non-MMI vehicle without navigation.)
[Headunit: Concert, Chorus, Symphony - Connection: OEM Specific]
DISCLAIMER:
Please check the plugs and connections in our picture matches the plugs and connections in your vehicle before you make your purchase. If unsure please message us with pictures of the plugs and connections so we can advise further.
