BMW 1 Series 2007 - 2013 Car Stereo Double Din Fascia Steering Wheel Stalk Interface Adaptor & Complete Fitting Kit (Please Note Vehicles with Automatic air conditioning only)
BMW 1 Series Car Stereo Double Din Fascia Steering Wheel Stalk & Parking Sensor Interface Kit
Description
This radio installation fascia is needed when fitting a replacement double din stereo. This installation kit is designed to provide everything you need when fitting a replacement stereo. This handy package will keep the steering wheel controls and also the rear reversing sensors working when you change the factory radio to an aftermarket one.
The interface supplied connects a compatible car stereo which must have a 3.5mm jack input on the back of the unitor a 3 wire fly lead allowing the existing stalk/steering wheel controls of the vehicle to carry on working when the new radio is fitted
Please makes sure your Stereo has this feature on the rear of the radio before purchasing this part.
(This kit retains the factory parking sensor, seat belt, washer fluid level and other warning audio tones in the vehicle)
Will Fit the following vehicles:
-
BMW 1 Series (E87 Facelift) 2007 - 2015 4/5-door version
-
BMW 1 Series (E81) 2007 - 2012 2/3-door version
-
BMW 1 Series (E82) 2007 - 2013 coupe
-
BMW 1 Series (E88) 2008 - 2013 convertible
Vehicles with Automatic Air Conditioning Controls (Push Buttons not Rotary Knobs) Please Check
Please NoteOnly suitable for cars without factory navigation systems fitted and without iDrive.
Installation Tips
For installing branded double din stereos ie Kenwood Pioneer Sony etc you will have to cut and trim some of the dash behind the factory radio in order for this panel to fit flush.
If using a motorised or Chinese branded radio you will have to also modify and cut the aperture hole behind this panel to make the radio fit and open/close properly when the stereo motorizes
What’s included in the Kit
Features
-
Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
-
Maintains the original features of the vehicle such as date, time and temperature display
Please email us to check compatibility with your vehicle if unsure before purchase as it might not be compatible with pre installed Sat Nav systems
Disclaimer:
- If unsure of the part that you require for your vehicle then please message us before you make your purchase as we cannot be responsible for returns and postage costs.
- The picture(s) in this listing are for illustration purposes only. The product design / style can vary due to alterations by suppliers during production.
- This product has been developed through carefully documented data and research from our suppliers. We cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.
