Connects2 CT10AU07 - Audi A4 A5 Parrot SOT T-Harness Cable Wiring Lead
Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the handsfree kit and route the phone audio through the cars front speakers. No vehicle cables need to be cut.
Fits the following vehicles:
| Manufacturer |
Model |
Note |
Year From |
Year To |
Headunit |
Connection |
| Audi |
A4 |
MMI Basic System, With Amplifier |
2008 |
|
|
OEM Specific |
| Audi |
A5 |
MMI Basic System, With Amplifier |
2007 |
|
|
OEM Specific |
Please Note: You will need to purchase an additional extension cable with this Sot lead. Please Check Below
- CT10UV01 Designed for Parrot Kit CK3000 Evolution / CK3100 / CK3300 Microphone and Keypad Extension
- CT10UV02 Designed for Parrot Kit CK3200 Microphone and Keypad Extension
- CT10UV04 Designed for Parrot Kit MKi9000 / MKi9100 Microphone and Display Extension
- CT10UV05 Designed for Parrot Kit MKi9200 Microphone and Display Extension
- CT10UV06 Designed for Parrot Kit MKi9100 / MKi9200 5 metre extension Cable
- CT10UV07 Designed for Parrot Kit MKi9000 / MKi9100 / MKi9200 5 metre Microphone extension cable
- CT10UV09 Designed for all parrot Kits 5 metre ISO-ISO extension cable
- CT10UV11 Designed for parrot Asteroid / Mini 3 metre extension cable
Installation:
Most installation is carried out at the original connection behind the original car stereo, in some instance, where the car has an amplified system, the installation is carried out at the factory amplifier.
The lead connects between the car ISO Harness lead and the connector provided with the car kit.
The power connection is taken from the cars orginal wiring, for cars that do not have ignition feed supply, it will be necessary to source an ignition feed directly from the car fuse box.
If the installation is carried out in the boot / trunk of the vehicle, then you will need an extension cable to allow for the device to be re-located to the front of the car.
