Celsus AN3023DAB - Digital DAB+ AM FM Car Radio Stereo Aerial Antenna Splitter
The Celsus DAB antenna splitter does away with the need to install an additional dedicated glass or roof mount DAB antenna when installing an aftermarket DAB tuner.
This active Adaptor/Splitter allows your standard non amplified AM/FM car aerial to receive DAB Digital radio signals, enabling you to retain your existing aerial and fit a DAB aftermarket radio without the need for an additional DAB aerial.
Please note this antenna is compatible with all non-amplified FM aerials only and will NOT work with amplified booster aerial systems.
This will only work on passive antenna systems. Therefore it is not suitable for factory amplified/active aerials. Amplified/active aerials are usually either the bee sting style, built in to the rear glass or are shorter than 50cm & have a power feed to the aerial base
How to install
Simply plug in line with your head unit aerial connection and then plug the DAB plug into the DAB socket on the back of the head unit.
- Connect the red wire to the aerial power lead that is 12 volts with the radio switched on.
- No need to install an additional DAB Antenna when installing an aftermarket DAB Tuner.
Compatible with the following make of Car Stereos which have DAB installed:
- Alpine
- Beat
- Blaupunkt
- JVC
- Kenwood
- LG
- Pioneer
- Sony
Note: You need to have a DAB Tuner in order to receive DAB transmission
