Connects2 CTKBM23 BMW 5 Series E60/E61 2003 - 2007 (Pre Facelift Models ONLY) Car Stereo Double Din Fascia Panel, Steering Wheel Stalk Interface Adaptor Fitting Kit
This Double Din Fascia & Steering Wheel Control kit allows installation of an aftermarket head unit into the vehicle. The kit also comes with a blanking fascia to replace the now redundant factory fitted dash screen creating a pocket on the top of the dashboard. You will also recieve a double din panel which will allow you to fit most double din head units
The interface connects a compatible car stereo ie Pioneer, Kenwood, Alpine, Clarion, JVC, Sony, Eonon, Xtrons and Erisin which has a 3.5mm jack input or a fly wire on the back of the unit labelled Steering wheel control
Please makes sure your Stereo has this feature on the rear before purchasing this part.
Steering Wheel Control (SWC) Features
Steering Wheel Control interfaces allow plug and play installation of a new aftermarket car stereo head unit into a vehicle whilst maintaining use of the exsisting steering wheel volume, track up and down and mobile phone answering controls if factory fitted.
Mobile Phone Buttons (MPB) Features
Mobile Phone Buttons Support feature allows you to use Phone Buttons on the Steering Wheel if already factory fitted with any compatible an aftermarket Bluetooth Head Unit you install.
Car Specifiation
Factory fitted radio this kit works with. Please check before you buy
What’s Included in the Kit
-
Double Din Fascia Adaptor (Black Finish)
-
Factory Screen Blanking Pocket
-
Steering Wheel Control Adaptor
-
Patch Lead
-
Aerial Adaptor
Installation tips
Some cutting behind the dash might be needed to fit the double din stereo in
The lose yellow wire on our SWC interface MUST be connected directly to battery to give a permanent 12V feed or the kit will not work
This panel is designed to fit most Japanese branded double din units such as Kenwood, Pioneer, JVC, Sony, Alpine and Clarion
If you are fitting a non-branded unit from china with brands such as Erisin, EONON Pumpkin and Xtron, there is a VERY high possibility YOU will have to modify, cut and trim this panel to suit the stereo and accommodate it in your dash.
These panels are designed based on Japanese stereo's which are a uniformed standard size, stereos from china can be different sizes and we cannot guarantee the stereo will fit without modification and we can not be held responsible.
If the panel is supplied with side brackets then the stereo cage is not used to fit the radio.
Please note every effort is made to get the parts listed within the listing correct to the best of our knowledge but we can not be responsible for vehicles on a change over year from the manufacturer
It is your responsibility to ensure the compatibility and we recommend that the parts pictured in our listing are compared to the actual connectors/parts in your vehicle before you make your purchase or you will have to return the incorrect item at your cost. If still unsure please contact us via the eBay messaging system with pictures that must be attached of the wiring and connections that you are trying to install so our tech guys can help and advise before you make your purchase.
