Car Specific Component Speaker Kits
408 products
Showing 385 - 408 of 408 products
Build a serious factory replacement front stage with car specific component speaker kits from Bass Junkies. Each Pioneer 700 watt 6.5 inch 2-way bundle is matched to a specific make, model and year so the drivers, tweeters and crossovers drop straight into your existing door pods and pillar mounts without cutting. Choose your vehicle, add a fascia adapter and an ISO harness, and lift vocals, clarity and stereo width well above any standard stereo or factory amplified setup across thousands of UK vehicles in 2026.
Recently viewed
Choosing the right car specific component speaker kit in 2026
A car specific component kit takes the guesswork out of an audio upgrade. Instead of buying a universal pair of speakers and then chasing down adapter rings, spacer brackets and grille mods, you choose your make, model and year on the Bass Junkies site and receive a Pioneer 6.5 inch 2-way set built to mount in the original door pods. The dome tweeters fit the original pillar or dash positions, and the supplied crossovers split the highs and mids cleanly to give clarity, stereo width and stage height that a standard factory speaker cannot reach.
Why a component set beats a basic coaxial
A coaxial speaker stacks a tweeter on top of the mid cone. A component kit separates the two drivers so the tweeter can sit higher in the cabin, lifting vocals to ear level. The result is a cleaner stereo image, less window glare on the high frequencies and a more lifelike soundstage. With car specific kits the difference is even more obvious because the drivers and crossovers are voiced for the acoustic load of your door panel.
Power, sensitivity and head unit matching
Every kit in the Pioneer range listed here carries a 700 watt peak rating, comfortable for any factory head unit and ideal for matching with a small four channel amplifier such as the Pioneer GM-DX series or a Match PP four channel. If you intend to stay on the head unit alone, the sensitivity figures still let the set sing at sensible volume. Add a clean amp and the bass output, dynamic headroom and tweeter detail step up another tier.
Brand quality at a glance
- Pioneer. Industry standard build, treated paper or IMPP cones, soft dome tweeters and crossovers tuned to lift vocals above road noise.
- JL Audio. Reference fidelity, mineral filled polypropylene cones and silk dome tweeters when you want studio accuracy in the car.
- Focal. French engineered drivers with flax or polyglass cones for a warm, musical signature loved by hi-fi enthusiasts.
- Hertz. Italian Mille and Cento ranges deliver punchy mids with rich dynamics.
- Helix. German precision and class-leading crossovers for installers who want flat, controlled response.
Vehicle specific fit list
Bass Junkies stock car specific component kits for hundreds of UK vehicles in 2026, including popular Renault, Samsung and Smart models alongside Audi, BMW, Ford, Hyundai, Kia, Mercedes, Peugeot, Seat, Skoda, Toyota, Vauxhall, Volkswagen and Volvo platforms. Each listing names the vehicle, the year range and the door it fits. If your car is not shown, the universal 6.5 inch 2-way range and our fit guides will point you to the correct adapter.
Compatibility and fitting
- Fascia adapter. Required if you also plan to fit a new head unit at the same time to keep the dash trim square.
- ISO harness. Splices factory power and speaker lines so no cable cutting is needed on most modern vehicles.
- Steering wheel control adapter. Retains volume, source and skip buttons on the steering wheel when adding a new stereo.
- Aerial adapter. Converts the OEM antenna plug to the standard DIN connector used on aftermarket head units.
- Active system adapter. Required where the car has a factory amplifier driving the standard speakers, so the new aftermarket signal is corrected and clean.
Tuning tips after installation
Once the drivers are bedded in over the first few hours, balance the front stage by adjusting the head unit fader fully forward. Set the tweeter level on the supplied crossover to flat first, then lift by one position if the dash material is heavily damped. A small bump of 60 hertz to 80 hertz on the head unit equaliser will fill out the mid bass without smearing the vocals.
What is in the box and what to add
Each kit ships with the matched pair of 6.5 inch mid bass drivers, the matching dome tweeters, the two passive crossovers and the mounting hardware. Add an amplifier wiring kit if you plan to fit an amp, a roll of butyl sound deadening for the inner door skin and a set of foam baffles to seal the rear of the cone and squeeze extra mid bass output.
Why buy from Bass Junkies
Bass Junkies has been installing and selling car audio in the United Kingdom since 1995. Every car specific kit is dispatched from the Wolverhampton workshop with technician backed advice on harnesses, fitting kits and tuning. If you would prefer a phone conversation before ordering, call the team on 01902 863 005 and the experienced installers will confirm the exact kit, the right harness and any extras needed for your vehicle.
















































