Phoenix Gold SX2 Series - SX2 600.1 Single Channel / Mono 600 Watts Car Audio Amplifier

In stock

Phoenix Gold SX2600.1 SX2 Series Mono Car Audio Amplifier 600w

Reproduce the full dynamic impact of each bass note, and deliver clear, articulate bass through your subwoofers with maximum power and efficiency. SX2 600.1 monoblock subwoofer amplifier drives 600 watts into 1 ohm.

Class D Topology
Power Rating: 300w x 1 Channel @ 4 ohm, 450w x 1 Channel @ 2 ohm, 600w x 1 Channel @ 1 ohm
Dimensions: 13.25" L x 8.5" W x 2.0" H - 337mm L x 216mm W x 51mm H

Premium Build Quality for Ultra Performance

Legendary Phoenix Gold massive unregulated power supply built for dynamic headroom and to drive low 1ohm impedance loads
Audio Precision Quality Control Verification

Chassis Features

Master/Slave strappable for huge power and multi-amp setups
RMD port allows you to add a remote monitoring display, giving you a visual of the voltage of your system

Double tier power supplies with OTM Onboard Thermal Management, which monitors the amplifiers internal temperatures. If abnormal temperatures are achieved, OTM will make minor adjustments to output power to allow the amplifier to return to normal operating temperatures without interruption to the amplifier's audible performance. 

Remote bass and phase controller with Bass Shift® (RBPC) allows for perfect adjustment of not only the subwoofer level but also 0-180° of phase adjustment from the listening position. Properly adjusting phase will allow enhanced bass response, dynamics and impact at any volume.

Switchable balanced or unbalanced inputs based on your input source's design for best signal to noise performance

Auto-turn on circuit (defeatable) helps when connecting to an OEM system that does not offer a Remote turn-on lead to activate the amplifier

Tri-light LED amplifier status indicators with short circuit, thermal and voltage protection

Front mount controls and connections provide a more pleasing overall aesthetic while conveniently locating the amplifiers controls in the same vicinity as the connections
RCA pass-through outputs

Total Control of Your Music Output

Variable filters on each channel allow you to fine tune your musical output to the precision you demand. All crossovers feature aluminum shaft precision potentiometers for exact crossover frequency selection.

Low Pass Crossover Range of 40Hz to 240Hz, you get quality lower bass
Subsonic Crossover Range of 10Hz to 120Hz to eliminate unwanted ultra low frequencies, improving the efficiency of your subwoofer
Bass Boost 0 to +6dB at 40Hz

Variable phase output can be adjusted 0 to 180 degrees. This adjustment can help achieve better “up front” bass, by enhancing your sub bass and mid bass transition and resolve subwoofer cancellation problems in certain installations. Resulting in tight, articulate bass that blends perfectly into the rest of your audio experience


Frequency Response - ± 6dB from 10Hz to 250Hz

Signal to Noise Ratio - 85.9dB

Low Pass Crossover - 12dB per Octave

Subsonic Filter - 12dB per Octave

LowPassCrossoverRange- 40Hz to 240Hz

SubsonicCrossoverRange- 10Hz to 120Hz

Bass Boost @ 40Hz - 0 to +6dB

LowLevelInputRange- 300 millivolts to 8V unbalanced

Lowest Recommended Load - 1 ohm

Typical Efficiency - 85%

Damping Factor - Greater than 200

Variable Phase Adjustment - 0 to 180 Degrees

RMS Power Output

300w x 1 @ 4 ohm

450w x 1 @ 2 ohm

600w x 1 @ 1 ohm

Recommend Power Wire Fuse: 60A

Power/Ground Wire Size: 4GA

More Information
SKU SX26001
Price £349.99
Dynamic Price No
Make No
Model No
Year No
Brands Phoenix Gold
Features 1 Ohm Stable, 2 Ohm Stable, 4 Ohm Stable
Write Your Own Review
You're reviewing:Phoenix Gold SX2 Series - SX2 600.1 Single Channel / Mono 600 Watts Car Audio Amplifier