You are here: Home >>  Car Amplifers >>  Car Amplifiers >>  2 Channel Amplifiers >>  Audiobahn A2300HCJ
2 Channel Amplifiers

Audiobahn A2300HCJ

Audiobahn A2300HCJ Audiobahn A2300HCJ

Was: £689.99

Send To Friend

Audiobahn A2300HCJ

The Audiobahn A2300HCJ HIGH CURRENT Series 2 Channel Amplifiers. Audiobahn High Current amplifiers utilize an advance power supply to increase the stability of their traditional AB MOSFET circuitry. This means High Current amplifiers can operate at much lower impedances and output more power than traditional AB MOSFET amplifiers. These competition amplifiers are stable to impedances as low as 1 ohm mono which allows them to drive maximum power to any component in a vehicle’s sound system. Audiobahn also employs unregulated power supplies which implies the higher the voltage of your electrical system the more power the amplifier will produce. This makes these power-hunger amplifiers ideal for competition.

Digital meters are featured on all Audiobahn High Current amplifiers. Adding an element of control the visual indicator allows you to see the voltage of your vehicle and how much voltage the amplifier is receiving. The digital volt meter’s cobalt blue LED illumination is visible in the dark.

All Audiobahn amplifiers feature 4-way protection circuitry which is designed to defend the amplifiers from thermal overload internally-contained short circuits voltage overload and DC offset. 4-Way protection ensures that these amplifiers will continue to operate despite the “real world” mishaps that can occur in the mobile audio environment.


  • High Current Circuitry
  • PWM MOSFET Power Supply
  • Double-Sided Glass Epoxy Circuit Board
  • S/N Ra tio: >100dB (+/- 1dB )
  • Frequency Response: 10Hz – 20kHz
  • Input Sensitivity: 200mV ~ 8V
  • Variable 24dB High -pas Cross over: 50Hz – 750Hz
  • Variable 24dB Low-pas Cross over: 30Hz – 120Hz
  • Variable Subsonic Filter: 20Hz - 45Hz
  • Variable Bass Boost: 0 – 18dB
  • Variable Bas Boost Frequency: 40Hz – 100Hz
  • RCA Throughput Connections
  • 4-way Protection Circuitry: Thermal Short Circuit Overload and DC Offset
  • Dual Cooling Fans
  • Digital Meter Output Response
  • Cobalt Blue Illumination
  • High Gloss Chrome-Plated Finish
  • Nickel-plated Block Terminals


  • 4 Ohm Stereo 450 x 2
  • 2 Ohm Stereo 700 x 2
  • 1 Ohm Stereo 1000 x 2
  • 4 Ohm Mono 600 x 1
  • 2 Ohm Mono 1200 x 1
  • 1 Ohm Mono 2400 x 1
  • Height 2 1/2"
  • Width 11 15/16"
  • Length 25 5/8"

Remote Mount Bass Boost Control with Clipping Indicator
Included with all High Current Amps.